PREPARATION OF BUFFER SOLUTION: “TRIS BUFFER SOLUTION”

PREPARATION OF BUFFER SOLUTION: “TRIS BUFFER SOLUTION”

This project work titled PREPARATION OF BUFFER SOLUTION: “TRIS BUFFER SOLUTION” has been deemed suitable for Final Year Students/Undergradutes in the Science Labouratory Department. However, if you believe that this project work will be helpful to you (irrespective of your department or discipline), then go ahead and get it (Scroll down to the end of this article for an instruction on how to get this project work).

Below is a brief overview of this Project Work.

Format: MS WORD  |  Chapters: 1-5  |  Pages: 55
ABSTRACT
Tris buffer solution was prepared in the laboratory by dissolving 4.6g of boric acid, 6.5g of EDTA and 60.5g of trisma base in 1000cm3 of distilled water. Comparative study were done on the commercially produced tris buffer solution, using and laboratory produced tris buffer solution, using pH meter for the p H and by carrying out genotype test for the efficacy of Tris buffer solution prepared in the laboratory was used as an electrolyte. This genotype test reduces the occurrence of sickle cell anemia. This expresses the efficacy rate and pH of laboratory produced Tris buffer solution as compared with that of commercially produced tris buffer solution. The result obtained for the pH of laboratory produced tris buffer solution was found to be 9.0 while that of commercially produced tris buffer solution was found to be 8.9. the result obtained for the efficacy using genotype test showed that tris buffer solution produced in laboratory has more efficacy than that produced commercially, but the difference is not significant.

==== The End ====

How to Download the Full Project Work for FREE

  • You can download the Full Project Work for FREE by Clicking Here.
  • On the other hand, you can make a payment of ₦5,000 and we will send the Full Project Work directly to your email address or to your Whatsapp. Clicking Here to Make Payment.

You Might Also Like