This project work titled DESIGN AND FABRICATION OF MINI COPULA FURNACE AND AN ATOMIZER FOR THE PRODUCTION OF POWDERED METAL FROM WASTE ALUMINIUM CANS has been deemed suitable for Final Year Students/Undergradutes in the Electrical & Electronics Department. However, if you believe that this project work will be helpful to you (irrespective of your department or discipline), then go ahead and get it (Scroll down to the end of this article for an instruction on how to get this project work).
Below is a brief overview of this Project Work.
Format: MS WORD
| Chapters: 1-5
| Pages: 65
DESIGN AND FABRICATION OF MINI COPULA FURNACE AND AN ATOMIZER FOR THE PRODUCTION OF POWDERED METAL FROM WASTE ALUMINIUM CANS
This research is centered on the design and fabrication of copula furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material and energy balance calculations and the design calculations performed from whose values are used to produce the design drawings. Mild steel was used for the internal linings of the furnace casing while other material were selected based on functionality, durability ,cost and local availability. The furnace and atomizer were assembled and the furnace inner wall of the casing was lined with refractory bricks made from heated mixture of kaolin, clay, sawdust and water after which the cylindrical shell was positioned. Testing was subsequently performed to evaluate the performance of the furnace and the atomizer by first gathering of the aluminum cans. The furnace was heated to 8700c and it was observe that the furnace has 36.9% efficiency which is within the acceptable value for furnace efficiencies. Atomizer produced various sizes of powder metal depending on the type of mesh used and the shape obtained was irregular in shape.
CHAPTER ONE
This research is centered on the design and fabrication of copula furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material and energy balance calculations and the design calculations performed from whose values are used to produce the design drawings. Mild steel was used for the internal linings of the furnace casing while other material were selected based on functionality, durability ,cost and local availability. The furnace and atomizer were assembled and the furnace inner wall of the casing was lined with refractory bricks made from heated mixture of kaolin, clay, sawdust and water after which the cylindrical shell was positioned. Testing was subsequently performed to evaluate the performance of the furnace and the atomizer by first gathering of the aluminum cans. The furnace was heated to 8700c and it was observe that the furnace has 36.9% efficiency which is within the acceptable value for furnace efficiencies. Atomizer produced various sizes of powder metal depending on the type of mesh used and the shape obtained was irregular in shape.
CHAPTER ONE
How to Download the Full Project Work for FREE
- You can download the Full Project Work for FREE by Clicking Here.
- On the other hand, you can make a payment of ₦5,000 and we will send the Full Project Work directly to your email address or to your Whatsapp. Clicking Here to Make Payment.