INVESTIGATION AND EVALUATION OF LOCAL LIQUID DIELECTRIC FOR POWER TRANSFORMER INSULATION

INVESTIGATION AND EVALUATION OF LOCAL LIQUID DIELECTRIC FOR POWER TRANSFORMER INSULATION

This project work titled INVESTIGATION AND EVALUATION OF LOCAL LIQUID DIELECTRIC FOR POWER TRANSFORMER INSULATION has been deemed suitable for Final Year Students/Undergradutes in the Electrical & Electronics Department. However, if you believe that this project work will be helpful to you (irrespective of your department or discipline), then go ahead and get it (Scroll down to the end of this article for an instruction on how to get this project work).

Below is a brief overview of this Project Work.

Format: MS WORD  |  Chapters: 1-5  |  Pages: 89
INVESTIGATION AND EVALUATION OF LOCAL LIQUID DIELECTRIC FOR POWER TRANSFORMER INSULATION
 
is 12.11 x 10-3 (which is within recommended units) and showed a high dielectric breakdown voltage (59.08kV). Results obtained showed that the inhabited soybean oil has properties comparable to those of mineral oil and is suitable for use as transformer dielectric fluid.
CHAPTER ONE
the type of mineral oil. This distribution is controlled by the crude oil and the refining processes used. Because of its wide availability, good properties and low cost, mineral oil is the fluid most used in the electric power transformer industry. New mineral oils have to be in accordance with the IEC 60296 or ASTM D3487. 

==== The End ====

How to Download the Full Project Work for FREE

  • You can download the Full Project Work for FREE by Clicking Here.
  • On the other hand, you can make a payment of ₦5,000 and we will send the Full Project Work directly to your email address or to your Whatsapp. Clicking Here to Make Payment.

You Might Also Like