DESIGN AND IMPLEMENTATION OF AN ONLINE LOCAL AREA NETWORK (LAN) KNOWLEDGE-BASED SYSTEM

DESIGN AND IMPLEMENTATION OF AN ONLINE LOCAL AREA NETWORK (LAN) KNOWLEDGE-BASED SYSTEM

This project work titled DESIGN AND IMPLEMENTATION OF AN ONLINE LOCAL AREA NETWORK (LAN) KNOWLEDGE-BASED SYSTEM has been deemed suitable for Final Year Students/Undergradutes in the Computer Science Department. However, if you believe that this project work will be helpful to you (irrespective of your department or discipline), then go ahead and get it (Scroll down to the end of this article for an instruction on how to get this project work).

Below is a brief overview of this Project Work.

Format: MS WORD  |  Chapters: 1-5  |  Pages: 50
DESIGN AND IMPLEMENTATION OF AN ONLINE LOCAL AREA NETWORK (LAN) KNOWLEDGE-BASED SYSTEM
 
ABSTRACT
The project is designed specially for those hardware engineers/computer scientist who are just commerce their carries in the field of installation and maintenance of computer network. While the theories are meant for commercial applicant that are interested in using the programme technique. Further more, in this project design, the principle of different type of network configuration are been highlighted and emphasis are made on the installation and maintenance techniques.  Finally, appropriate information are been acquired from human experts in the field of network.
 
TABLE OF CONTENT
 
TITLE PAGE
CERTIFICATION
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
ORGANISATION OF THE WORK
TABLE OF CONTENT
 
CHAPTER ONE: INTRODUCTION
1.1             STATEMENT OF PROBLEM
1.2             PURPOSE OF STUDY
1.3             AIMS AND OBJECTIVES
1.4             SCOPE AND PRELIMITATION
1.5             LIMITATIONS OR CONSTRAINTS
1.6             ASSUMPTIONS
1.7             DEFINITION OF TERMS
 
CHAPTER TWO: LITERATURE REVIEW
 
HIERARCHICAL TOPOLOGY
STARTOPOLOGY
BUSTOPOLPGY
RING NETWORK
BNC CONNECTOR
 
CHAPTER THREE
3.0   DESCRIPTION AND ANALYSIS OF EXISTING SYSTEM
3.1   FACT FINDINGS METHOD USED
3.2   OBJECTIVES OF THE EXISTING SYSTEM
3.3   INOUT ANALYSIS
3.4   PROCESS ANALYSIS
3.5   OUTPUT ANALYSIS 
3.6   PROBLEMS OF THE EXISTING SYSTEM
3.7   JUSTIFICATION OF THE NEW SYSTEM
 
CHAPTER FOUR
4.1   DESIGN OF THE NEW SYSTEM OUTPUT SPECIFICATION AND DESIGN
4.2   FILE DESIGN
4.3   PROCEDURE CHART
4.4   SYSTEM FLOW CHAR
4.5   SYSTEM REQUIREMENT
 
CHAPTER FIVE
5.1             IMPLEMENTATION
5.2             PROGRAM DESIGN
5.3             PROGRAM FLOW CHART
5.4             PSEUDOCODES
5.5             SOURCE PROGRAM
5.6             TEST RUN
 
CHAPTER SIX: DOCUMENTATION
 
 
CHAPTER SEVEN
7.1             RECOMMENDATION
7.2             CONCLUSION
APPENDICES/REFERENCE

==== The End ====

How to Download the Full Project Work for FREE

  • You can download the Full Project Work for FREE by Clicking Here.
  • On the other hand, you can make a payment of ₦5,000 and we will send the Full Project Work directly to your email address or to your Whatsapp. Clicking Here to Make Payment.

You Might Also Like