This project work titled DESIGN AND CONSTRUCTION OF HOUSE BELL WITH INDICATING LIGHT has been deemed suitable for Final Year Students/Undergradutes in the Electrical & Electronics Department. However, if you believe that this project work will be helpful to you (irrespective of your department or discipline), then go ahead and get it (Scroll down to the end of this article for an instruction on how to get this project work).
Below is a brief overview of this Project Work.
Format: MS WORD
| Chapters: 1-5
| Pages: 45
DESIGN AND CONSTRUCTION OF HOUSE BELL WITH INDICATING LIGHT
CHAPTER ONE
INTRODUCTION
BACKGROUND OF THE STUDY
To cleanly understand the wood information technology and communication which is the life blood of all human activities the assimilation of communication technology is of great important. The development of communication technology in any nation makers communication technology easy and pleasant. And one of basic building block of a communication system is the house bell indicating which serves as inter-call light to ensure proper communication within an officer or domestic.
An electrical bell can be define as dunce which can be use to alent signal for indicating of problem in alarm signals. The device is classified according to were types, mode of operation and the application there are numerous types of alarming signals but for the purpose of this project an electric bell with light indicator is considered.
These device receives its input signal form an electrical device known as bell push. That was connected at the wing board Via joint box. The signal (current) passes through the wire and fed into the bell which cause the bell to ring in order to alent the receiver. Furthermore, the objective of these house ell is to provide a cheap and continent means of communication between two or more people in the same premises. The major different between inter- communication system using telephone and electric bell is that the signal is transmitted by the call indicator system in place of speech as in the case of the telephony.
CHAPTER ONE
INTRODUCTION
BACKGROUND OF THE STUDY
To cleanly understand the wood information technology and communication which is the life blood of all human activities the assimilation of communication technology is of great important. The development of communication technology in any nation makers communication technology easy and pleasant. And one of basic building block of a communication system is the house bell indicating which serves as inter-call light to ensure proper communication within an officer or domestic.
An electrical bell can be define as dunce which can be use to alent signal for indicating of problem in alarm signals. The device is classified according to were types, mode of operation and the application there are numerous types of alarming signals but for the purpose of this project an electric bell with light indicator is considered.
These device receives its input signal form an electrical device known as bell push. That was connected at the wing board Via joint box. The signal (current) passes through the wire and fed into the bell which cause the bell to ring in order to alent the receiver. Furthermore, the objective of these house ell is to provide a cheap and continent means of communication between two or more people in the same premises. The major different between inter- communication system using telephone and electric bell is that the signal is transmitted by the call indicator system in place of speech as in the case of the telephony.
How to Download the Full Project Work for FREE
- You can download the Full Project Work for FREE by Clicking Here.
- On the other hand, you can make a payment of ₦5,000 and we will send the Full Project Work directly to your email address or to your Whatsapp. Clicking Here to Make Payment.