This project work titled CONSTRUCTION OF OFFICE TABLE AND CHAIRS has been deemed suitable for Final Year Students/Undergradutes in the Chemical Engineering Department. However, if you believe that this project work will be helpful to you (irrespective of your department or discipline), then go ahead and get it (Scroll down to the end of this article for an instruction on how to get this project work).
Below is a brief overview of this Project Work.
Format: MS WORD
| Chapters: 1-4
| Pages: 58
CONSTRUCTION OF OFFICE TABLE AND CHAIRS
ABSTRACT
The aim of this project was to construct one office table and four chairs. In the course of this project the length of plank used was 12” and we used about 4 number (mahogany) of 1” thickness, ¾ plywood of 1 sheet of 1” thickness, as well as ¼” plywood of ½ and glue 1 tin wenner 1 rod, foam ½ sheet. Fabrics 4 years, spraying materials and 21b of nail were utilized to effect the construction of office table and chairs. The materials were marked out to the required sizes, cut, folded, fited, assembled, nail, mort iced and then spraying it finally to prevent corrosion attack. There are the necessary constructional procedure steps adopted in the project. The accuracy and precision with which the construction steps and consequently, the assemblage of the component parts greatly enhanced our aim of constructing a suitable equipment for use of one table and four chairs. The aim of constructing the table and the chair is to enable chemical Engineering department as future Engineer to know and also learn how to construct an office table or chairs and the essence of it. The cost of production of the office table and chairs as at 7th August, 2005 is N21,000.00.
ABSTRACT
The aim of this project was to construct one office table and four chairs. In the course of this project the length of plank used was 12” and we used about 4 number (mahogany) of 1” thickness, ¾ plywood of 1 sheet of 1” thickness, as well as ¼” plywood of ½ and glue 1 tin wenner 1 rod, foam ½ sheet. Fabrics 4 years, spraying materials and 21b of nail were utilized to effect the construction of office table and chairs. The materials were marked out to the required sizes, cut, folded, fited, assembled, nail, mort iced and then spraying it finally to prevent corrosion attack. There are the necessary constructional procedure steps adopted in the project. The accuracy and precision with which the construction steps and consequently, the assemblage of the component parts greatly enhanced our aim of constructing a suitable equipment for use of one table and four chairs. The aim of constructing the table and the chair is to enable chemical Engineering department as future Engineer to know and also learn how to construct an office table or chairs and the essence of it. The cost of production of the office table and chairs as at 7th August, 2005 is N21,000.00.
How to Download the Full Project Work for FREE
- You can download the Full Project Work for FREE by Clicking Here.
- On the other hand, you can make a payment of ₦5,000 and we will send the Full Project Work directly to your email address or to your Whatsapp. Clicking Here to Make Payment.